Skip to content
 Scroll To Top

Note: courses may take up to a minute to load.

View Full UAS Schedule

2019 Spring Classes

CT Construction Technology

CT 100
3 CR
Introduction to woodworking and woodworking equipment, wood project design and construction, and finishing products and procedures.
CRN SECTION INSTRUCTOR MEETS
32794 J01 Robert Jensen
Technical Ed Center 130
Wednesday
6:00p - 9:45p
1/14 - 5/4

No notes

Tuition and fees: $876 (additional charges may apply)

Introduction to designing and building a residential deck. The two first weekends consist of planning, material estimating, and design instruction. The final weekend will be reserved for building a deck chosen from designs created during the previous sessions.
CRN SECTION INSTRUCTOR MEETS
38528 J01 Pete Traxler
Technical Ed Center 124
Mon, Wed, Fri
5:00p - 10:00p
4/8 - 4/14
Field
Sun, Sat
8:00a - 5:00p
4/13 - 4/14

Seats remaining: 15

Pass/Fail grading.

The lab portion of the course will take place at the house build site.

Tuition and fees: $534 (additional charges may apply)

CT 120Save 25%
3 CR
Overview of construction hand and power tool usage, building procedures and codes, job and site planning, layout, foundation, floor wall, and roof framing methods, utilizing current construction practices.
CRN SECTION INSTRUCTOR MEETS
32798 J01 Justin Fantasia
Technical Ed Center 130
Tue, Thu
12:30p - 4:00p
1/15 - 3/5
Technical Ed Center 132
Tue, Thu
12:30p - 4:00p
1/15 - 3/5

No notes

Tuition and fees: $717 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

Introduces the different types of gypsum drywall; uses, fastening, and finishing techniques.
CRN SECTION INSTRUCTOR MEETS
32801 J01 Timothy Lagerquist
Technical Ed Center 132
Tue, Thu
6:00p - 9:00p
4/2 - 4/25
Technical Ed Center 120
Tue, Thu
6:00p - 9:00p
4/2 - 4/25
Technical Ed Center 130
Saturday
9:00a - 1:30p
4/6 - 4/27
Technical Ed Center 120
Saturday
9:00a - 1:30p
4/6 - 4/27
Technical Ed Center 132
Saturday
9:00a - 1:30p
4/6 - 4/27

Seats remaining: 14

No notes

Tuition and fees: $609 (additional charges may apply)

CT 155
3 CR
Special methods in wood construction and wood finishing, emphasizing furniture and precision woodcraft.
CRN SECTION INSTRUCTOR MEETS
32804 J01 Robert Jensen
Technical Ed Center 130
Wednesday
6:00p - 9:45p
1/14 - 5/4

Prerequisite: CT S100.

No notes

Tuition and fees: $876 (additional charges may apply)

CT 181
3 CR
Develops intermediate level CADD (computer-aided design drafting) skills for architectural, civil, structural, mechanical and electrical drawings used in building construction.
CRN SECTION INSTRUCTOR MEETS
32808 J01 Robin Gilcrist
Technical Ed Center 220
Thursday
6:00p - 9:45p
1/14 - 5/4

Prerequisite: CT S175 or instructor permission.

No notes

Tuition and fees: $826 (additional charges may apply)

CT 201Save 25%
3 CR
Design, construction and basic building science for understanding, planning, and constructing a durable home in a cold climate. Upon satisfactory completion, this course meets the prerequisite for the State of Alaska Contractor Residential Endorsement and also for 16 continuing education credits by the State of Alaska, Division of Occupation Licensing for General Contractors with Residential Endorsement.
CRN SECTION INSTRUCTOR MEETS
32810 J01 Robin Gilcrist
Technical Ed Center 220
Wednesday
6:00p - 8:45p
1/14 - 5/4

No notes

Tuition and fees: $642 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CT 222Save 25%
3 CR
Skill development in contemporary methods of building construction.
CRN SECTION INSTRUCTOR MEETS
32811 J01 Justin Fantasia
Technical Ed Center 132
Tue, Thu
12:20p - 4:30p
3/19 - 4/25
Technical Ed Center 130
Tue, Thu
12:20p - 4:30p
3/19 - 4/25

Prerequisite: CT S120.

No notes

Tuition and fees: $717 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CT 223Save 25%
3 CR
Explore the methods and means of finishing a building’s interior. Topics include drywall application, wall and ceiling finishes, interior door installation, stair layout and cabinet installation. Instruction will be through classroom presentations, hands-on projects, student research, and field visits. Follows best practices for marine climates.
CRN SECTION INSTRUCTOR MEETS
38220 J01 Pete Traxler
Field
Tue, Thu
12:00p - 5:00p
1/14 - 1/25
Technical Ed Center 130
Mon, Wed, Fri
8:00a - 5:00p
1/14 - 1/25
Technical Ed Center 130
Tue, Thu
8:00a - 11:55a
1/14 - 1/25

Prerequisite: CT S120 (C 2.00 or better) or concurrent enrollment.

Session requirement: department approval required to register.

Tuition and fees: $717 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

Overview of organizing, planning and estimating from construction drawings and specifications. A review of codes, materials, and construction methods to establish estimates of time and materials for on-site construction. An overview of construction contracts.
CRN SECTION INSTRUCTOR MEETS
32812 J01 Robin Gilcrist
Technical Ed Center 220
Monday
6:00p - 8:45p
1/14 - 5/4

No notes

Tuition and fees: $876 (additional charges may apply)

CT 291
6 CR
CRN SECTION INSTRUCTOR MEETS
38483 J01 Robin Gilcrist
Arranged
1/22 - 4/30

Section requirement: requires a signed Special Course form with registration. Contact your accounting advisor to arrange internship.

Tuition and fees: $1602 (additional charges may apply)

 

Note: courses may take up to a minute to load.

View Full UAS Schedule

2019 Summer Classes

 

Note: courses may take up to a minute to load.

View Full UAS Schedule

2019 Fall Classes

CT Construction Technology

CT 100
3 CR
Introduction to woodworking and woodworking equipment, wood project design and construction, and finishing products and procedures.
CRN SECTION INSTRUCTOR MEETS
70130 J01 Robert Jensen
Technical Ed Center 120
Wednesday
6:00p - 9:45p
8/26 - 12/14

Seats remaining: 16

Stacked with CT S155-J01.

No notes

Tuition and fees: $912 (additional charges may apply)

Provides a survey of the skills necessary to be successful in the construction industry. Students will learn basic employment expectations, refresh their construction math skills, learn how to read and interpret construction drawings, and practice communicating these concepts to coworkers, supervisors, and potential employers.
CRN SECTION INSTRUCTOR MEETS
77177 J01 Staff
Mon, Wed, Fri
8:00a - 12:15p
8/26 - 8/30

Seats remaining: 16

No notes

Tuition and fees: $304 (additional charges may apply)

Introduces students to the proper use and care of common hand and power tools deployed in the construction industry. Students will develop the knowledge to select and safely operate the appropriate tool for various conditions, and maintain equipment in good working order. The course provides a broad overview of materials commonly encountered in light construction, including wood, lumber, engineered lumber products, and fasteners. Special attention will be given to safety guidelines for workers handling materials on the job site. Covers proper procedures and techniques to use when lifting, stacking, transporting, and unloading materials. Introduces basic motorized and non-motorized material-handling equipment commonly found in the construction environment.
CRN SECTION INSTRUCTOR MEETS
77178 J01 Staff
Technical Ed Center 132
Mon, Wed, Fri
1:00p - 5:15p
8/26 - 8/30

Seats remaining: 16

No notes

Tuition and fees: $329 (additional charges may apply)

Provides students with training on the recognition, avoidance, abatement, and prevention of hazards to health safety in the construction industry. Students will discuss the most common cause of accidents in the construction workplace and the impact on the worker and employers. Reviews the roles of the worker, employer, and OSHA in creating a safe workplace. Provides information regarding workers' rights, employer responsibilities, and how to file a complaint. Students will receive an OSHA 10-Hour Card upon successful completion of the course. Pass/Fail grading.
CRN SECTION INSTRUCTOR MEETS
77179 J01 Justin Fantasia
Technical Ed Center 132
Tue, Thu
8:00a - 4:00p
8/27 - 8/29

Seats remaining: 16

Pass/Fail grading.

No notes

Tuition and fees: $329 (additional charges may apply)

Examines techniques for laying out, cutting and erecting wood floor, wall, and roof frame assemblies. Students will learn to select and use the correct tools and materials for each phase of the construction process. Class will typically meet on an off-campus project site or in the TEC construction lab.
CRN SECTION INSTRUCTOR MEETS
77202 J01 Justin Fantasia
Technical Ed Center 132
Thursday
9:00a - 5:00p
9/17 - 10/10
Technical Ed Center 132
Tuesday
1:00p - 5:00p
9/17 - 10/8

Seats remaining: 16

Prerequisite: CT S103 and CT S121, or concurrent enrollment.

No notes

Tuition and fees: $633 (additional charges may apply)

Course provides a lecture based overview of residential light wood frame construction. Students will learn wood frame construction for typical residential floor, wall and roof structures and to identify and select appropriate materials and techniques for building in a cold maritime environment. Students will estimate material quantities; explore best building practices; review plans, specifications and code requirements. May be taken concurrently with CT S121L.
CRN SECTION INSTRUCTOR MEETS
77201 J01 Justin Fantasia
Technical Ed Center 132
Tuesday
9:00a - 12:15p
9/17 - 10/8

Seats remaining: 16

Prerequisite: CT S103 or concurrent enrollment.

No notes

Tuition and fees: $279 (additional charges may apply)

Examines several prevalent foundation systems for residential buildings. Students learn to build a foundation appropriate to soil and site conditions and techniques for cast-in-place concrete construction.
CRN SECTION INSTRUCTOR MEETS
77203 J01 Staff
Technical Ed Center 132
Mon, Wed, Fri
9:30a - 4:00p
9/2 - 9/6

Seats remaining: 16

Prerequisite: CT S103 or concurrent enrollment.

No notes

Tuition and fees: $329 (additional charges may apply)

CT 155
3 CR
Special methods in wood construction and wood finishing, emphasizing furniture and precision woodcraft.
CRN SECTION INSTRUCTOR MEETS
70139 J01 Robert Jensen
Technical Ed Center 120
Thursday
6:00p - 9:45p
8/26 - 12/14

Seats remaining: 16

Prerequisite: CT S100.

Stacked with CT S100-J01.

No notes

Tuition and fees: $912 (additional charges may apply)

Covers basic architectural drafting and residential design. Students will learn to read a set of house plans, complete a conceptual design for a house following current International Residential Codes, will understand standard building practices for a cold maritime climate, and will be aware of green building practices.
CRN SECTION INSTRUCTOR MEETS
70144 J01 Robin Gilcrist
Technical Ed Center 220
Wednesday
6:00p - 9:00p
8/26 - 12/14

Seats remaining: 15

No notes

Tuition and fees: $862 (additional charges may apply)

An introduction to computer aided design and drafting using the industrial standard AutoCAD software. Includes the basics of computer hardware and software, computer skills required for creating and editing drawings.
CRN SECTION INSTRUCTOR MEETS
70145 J01 Robin Gilcrist
Technical Ed Center 220
Tuesday
6:00p - 9:45p
8/26 - 12/14

Seats remaining: 15

No notes

Tuition and fees: $837 (additional charges may apply)

Study of interior finish carpentry materials and techniques. Topics include reviewing construction documents to determine types and quantities of drywall, finishing materials, and interior trim. Students will also review codes applicable to layout and construction of stairs, guardrails, and handrails.
CRN SECTION INSTRUCTOR MEETS
77205 J01 Staff
Technical Ed Center 130
Tuesday
9:00a - 12:15p
11/5 - 11/26

Seats remaining: 16

Prerequisite: CT S103 or concurrent enrollment.

No notes

Tuition and fees: $279 (additional charges may apply)

This hands-on lab provides students with experience using materials, tools, and techniques for application of interior finishing in residential construction. Students will learn to lay out and assemble a stair carriage; install insulation, air barrier, and drywall; prepare and install flooring, pre-hung doors and lock sets, and apply interior trim.
CRN SECTION INSTRUCTOR MEETS
77206 J01 Staff
Technical Ed Center 132
Tue, Thu
1:00p - 5:00p
11/5 - 11/26

Seats remaining: 16

Prerequisite: CT S103 and CT S212, or concurrent enrollment.

No notes

Tuition and fees: $633 (additional charges may apply)

 
 
 

Content maintained by School of Career Education.