Skip to content
 Scroll To Top

Below is a listing of our MT credit classes.  For a full listing of all Marine Transportation course offerings please click on “Courses” on the sidebar.

Note: courses may take up to a minute to load.

View Full UAS Schedule

2019 Spring Classes

MTR Marine Transportation

MTR 119
1 CR
Learn to safely operate a small vessel in Alaskan waters. Covers navigation, rules of the road, trip planning including weather, radio operation, line handling and vessel operation including a practice session on the water. Foul weather/rain gear may be required.
CRN SECTION INSTRUCTOR MEETS
36736 K01 Neil Nickerson
Technical Ed Center 106
Tue, Wed, Thu
7:45a - 4:45p
4/16 - 4/18

Seats remaining: 12

This class is located in Juneau.

Tuition and fees: $245 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
37438 K02 Mariah Warren
Ketchikan Regnl MT/Career Ctr 133
Mon, Tue, Wed
6:00p - 8:00p
4/15 - 4/20
Saturday
4/15 - 4/20

Seats remaining: 9

No notes

Tuition and fees: $270 (additional charges may apply)

MTR 120Save 25%
1 CR
An introduction to outboard systems that need maintenance and upkeep for efficient operation. Ignition, carburetion power head and lower unit systems will be studied emphasizing preventive maintenance.
CRN SECTION INSTRUCTOR MEETS
38516 K01 Gabe Dunham
Ketchikan Regnl MT/Career Ctr 123
Friday
5:30p - 9:30p
4/26 - 4/28
Ketchikan Regnl MT/Career Ctr 116
Friday
5:30p - 9:30p
4/26 - 4/28
Ketchikan Regnl MT/Career Ctr 123
Sun, Sat
9:00a - 4:00p
4/26 - 4/28
Ketchikan Regnl MT/Career Ctr 116
Sun, Sat
9:00a - 4:00p
4/26 - 4/28

Seats remaining: 8

No notes

Tuition and fees: $242 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

MTR 122Save 25%
1 CR
An introduction to diesel engine systems that need maintenance and upkeep for efficient operation. Basic principles, fuel, air intake and exhaust, lubricating, cooling and starting systems will be studied, emphasizing preventive maintenance.
CRN SECTION INSTRUCTOR MEETS
36700 K01 Lawrence O'Loane
Ketchikan Regnl MT/Career Ctr 116
Thu, Fri
5:30p - 8:30p
4/18 - 4/20
Ketchikan Regnl MT/Career Ctr 123
Thu, Fri
5:30p - 8:30p
4/18 - 4/20
Ketchikan Regnl MT/Career Ctr 123
Saturday
9:00a - 4:00p
4/18 - 4/20
Ketchikan Regnl MT/Career Ctr 116
Saturday
9:00a - 4:00p
4/18 - 4/20

Seats remaining: 9

No notes

Tuition and fees: $227 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

MTR 129Save 25%
2 CR
This US Coast Guard approved course meets the requirements of the International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW) 95. The four modules of the course are Personal Survival, Basic Fire Fighting, First Aid/CPR, and Personal Safety & Social Responsibility. Beards must be shaven to insure a good Self Contained Breathing Apparatus (SCBA) face mask seal.
CRN SECTION INSTRUCTOR MEETS
37439 K01 Mariah Warren
Ketchikan Regnl MT/Career Ctr 132
Mon - Fri
8:00a - 5:00p
3/18 - 3/22
Ketchikan Regnl MT/Career Ctr 133
Mon - Fri
8:00a - 5:00p
3/18 - 3/22

Prerequisite: Must have a doctor's approval to physically demonstrate practical competencies, and must pass an English proficiency exam.

No notes

Tuition and fees: $994 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
37440 K02 Mariah Warren
Ketchikan Regnl MT/Career Ctr 133
Mon - Fri
8:00a - 5:00p
3/25 - 3/29
Ketchikan Regnl MT/Career Ctr 132
Mon - Fri
8:00a - 5:00p
3/25 - 3/29

Prerequisite: Must have a doctor's approval to physically demonstrate practical competencies, and must pass an English proficiency exam.

No notes

Tuition and fees: $994 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
37613 K03 Mariah Warren
Ketchikan Regnl MT/Career Ctr 133
Mon - Fri
8:00a - 5:00p
3/4 - 3/8
Ketchikan Regnl MT/Career Ctr 132
Mon - Fri
8:00a - 5:00p
3/4 - 3/8

Prerequisite: Must have a doctor's approval to physically demonstrate practical competencies, and must pass an English proficiency exam.

No notes

Tuition and fees: $994 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
38864 K04 Mariah Warren
Ketchikan Regnl MT/Career Ctr 132
Mon - Fri
8:00a - 5:00p
4/4 - 4/10
Ketchikan Regnl MT/Career Ctr 133
Mon, Tue, Wed, Fri
8:00a - 5:00p
4/4 - 4/10

Prerequisite: Must have a doctor's approval to physically demonstrate practical competencies, and must pass an English proficiency exam.

No notes

Tuition and fees: $994 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

MTR 220Save 25%
2 CR
This U.S. Coast Guard approved course provides training in the use of lifeboats, life rafts and survival gear. It meets the requirements of 46 CFR 12.10-3(a)(6) and 46 CFR 12.10-5 for endorsement for Lifeboatman. It also meets the requirements of Section A-VI/2 and Table A-VI/2-1 of the Standards of Training, Certification and Watchkeeping for Seafarers (STCW) 95. Rain gear may be needed for outside drills.
CRN SECTION INSTRUCTOR MEETS
37441 K01 Mariah Warren
Ketchikan Regnl MT/Career Ctr 132
Tue - Fri
8:00a - 5:00p
4/16 - 4/19

Seats remaining: 14

Students must provide personal foul weather gear appropriate for the marine environment.

Tuition and fees: $719 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

This U.S. Coast Guard approved course satisfies the Standards of Training and Certification of Watchkeeping (STCW) 95 for Ratings Forming Part of a Navigation Watch. Included in the course are helm commands and duties of a mariner on a navigation watch.
CRN SECTION INSTRUCTOR MEETS
37443 K01 Mike LaBarge
Ketchikan Regnl MT/Career Ctr 136
Mon, Tue, Wed
8:00a - 5:00p
4/8 - 4/10
Ketchikan Regnl MT/Career Ctr 135
Mon, Tue, Wed
8:00a - 5:00p
4/8 - 4/10

No notes

Tuition and fees: $397 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

MTR 228Save 25%
2 CR
Required for persons assigned to operate Fast Rescue Boats. It is USCG approved and meets the requirements for Standards, Training and Certification of Watchkeeping (STCW) 95. Much of the class time is spent operating a fast rescue boat on the water. Requires prior experience handling a skiff, warm clothing and rain gear.
CRN SECTION INSTRUCTOR MEETS
37444 K01 Mariah Warren
Ketchikan Regnl MT/Career Ctr 133
Mon - Fri
8:00a - 5:00p
4/22 - 4/26

Course is full. Waitlist 0 of 10

Students must provide personal foul weather gear appropriate for the marine environment.

Tuition and fees: $1094 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

This course and instructor have been approved by the US Coast Guard for third party testing. A UAS certificate of completion is accepted as a substitute for testing by the Coast Guard. Depending on sea experience and other Coast Guard requirements, a person passing this course is eligible to receive an Operator of Uninspected Passenger Vessel (OUPV, commonly called a 6-pack license) up to a Master 100 Gross Ton license.
CRN SECTION INSTRUCTOR MEETS
36737 K02 Neil Nickerson
Technical Ed Center 106
Mon - Sat
7:45a - 4:45p
2/18 - 3/1

This class is located in Juneau.

Tuition and fees: $985 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

This course and instructor have been approved by the US Coast Guard for third party testing. A UAS certificate of completion is accepted as a substitute for testing by the Coast Guard. Depending on sea experience and other Coast Guard requirements, a person passing this course is eligible to receive an Operator of Uninspected Passenger Vessel (OUPV, commonly called a 6-pack license) up to a Master 100 Gross Ton license.
CRN SECTION INSTRUCTOR MEETS
37590 K01 Mike LaBarge
Ketchikan Regnl MT/Career Ctr 136
Mon - Sat
8:00a - 5:00p
2/4 - 2/15
Ketchikan Regnl MT/Career Ctr 135
Mon - Sat
8:00a - 5:00p
2/4 - 2/15

No notes

Tuition and fees: $1035 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

This course and instructor have been approved by the US Coast Guard for third party testing. A UAS certificate of completion is accepted as a substitute for testing by the Coast Guard. Depending on sea experience and other Coast Guard requirements, a person passing this course is eligible to receive an Operator of Uninspected Passenger Vessel (OUPV, commonly called a 6-pack license) up to a Master 100 Gross Ton license.
CRN SECTION INSTRUCTOR MEETS
36738 K03 Neil Nickerson
Mon - Sat
8:00a - 5:00p
3/18 - 3/29

This class is located in Sitka.

Tuition and fees: $985 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

MTR 242Save 25%
2 CR
Marine firefighting preparedness and response leadership. Subjects include fire prevention, ship organization, damage control and stability. This course is USCG approved and meets the Standards of Training and Certification of Watchkeeping (STCW) 95.
CRN SECTION INSTRUCTOR MEETS
37445 K01 Andrew Tighe
Ketchikan Regnl MT/Career Ctr 132
Wed - Sat
8:00a - 5:00p
2/6 - 2/9

Prerequisite: MTR S129 or a certificate in Basic Fire Fighting.

No notes

Tuition and fees: $584 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

Intended for mariners responsible for cargo and the safety of passengers in emergency situations. It meets the Crisis Management and Human Behavior requirements of Standards, Training and Certification of Watchkeeping (STCW) 95 including Roll On Roll Off (Ro-Ro) passenger vessels.
CRN SECTION INSTRUCTOR MEETS
36756 KD1 Neil Nickerson
Ketchikan Regnl MT/Career Ctr 133
Thursday
8:00a - 12:00p
4/3 - 4/4
Technical Ed Center 106
Thursday
8:00a - 12:00p
4/3 - 4/4
Technical Ed Center 106
Wednesday
8:00a - 5:00p
4/3 - 4/4
Ketchikan Regnl MT/Career Ctr 133
Wednesday
8:00a - 5:00p
4/3 - 4/4

Prerequisite: Requires US Coast Guard approved certificate of completion in Crowd Management, or instructor approval.

This course will be streamed via videoconference from Juneau to Ketchikan with the instructor located in Juneau. Students must attend in a classroom in either Juneau or Ketchikan. For AMHS employees only.

Tuition and fees: $192 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

 

VTEC Vocational Technology, NonCred

CRN SECTION INSTRUCTOR MEETS
36734 K01 Neil Nickerson
Technical Ed Center 106
Saturday
9:00a - 3:00p
4/6 - 4/6

This class is located in Juneau. This class is intended for mariners who require first aid/CPR/AED for licensing/credentialing purposes, although members of the general public may also take the course. This class and instructor are USCG-approved and students completing will receive a USCG-accepted certificate of completion as well as the standard American Heart Association First Aid/CPR/AED card.

Tuition and fees: $95 (additional charges may apply)

VTEC 020
0 CR
CRN SECTION INSTRUCTOR MEETS
37803 K01 Kenneth Horn
Ketchikan Regnl MT/Career Ctr 124
1/14 - 5/4

Drop in time for practice projects. VTEC:Drop In Welding per session. Contact instructor for additional information at 228-4571.

Tuition and fees: $90 (additional charges may apply)

Participants will gain knowledge of basic process control systems, metering/telemetry, ethernet I/O, buses, Purdue ISA 95, safety and protection systems, physical security, communication mediums and external network communications, field device architecture, industrial protocols, network protocols, network segmentation, wireless security, disaster recovery and business continuity, and system backup and restore.
CRN SECTION INSTRUCTOR MEETS
37809 JD1 Larisa Breton
Distance Ed WEB
1/14 - 5/4

For more information or to register call (907) 796-6124.

Tuition and fees: $600 (additional charges may apply)

For students needing additional clinical time to test for the CNA exam.
CRN SECTION INSTRUCTOR MEETS
38808 J01 Ce Ce Brenner
Arranged
3/8 - 5/4

Loc: Wildflower Court and Juneau Pioneer Home.

Tuition and fees: $400 (additional charges may apply)

Introduces students to the field of construction. Upon completion, students will understand safe work procedures, proper use of personal protection equipment and identify potential construction hazards. Students will also be able to safely use a wide variety of hand tools and power tools used in construction. National Center for Construction Education and Research core curriculum will guide the instruction. Students who successfully complete the course will be eligible to test for NCCER modules: 00101-009 Basic Safety, 00103-90 Introduction to Hand Tools and 00104-09 Introduction to Power Tools.
CRN SECTION INSTRUCTOR MEETS
33060 J01 Pete Traxler
Technical Ed Center 120
Mon - Fri
9:00a - 4:30p
4/29 - 5/3

Seats remaining: 12

Prerequisite: Department approval required to register.

For more information or to register call (907) 796-6045. This course will result in 35 contact hours.

Tuition and fees: $0 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
33062 J03 Pete Traxler
Technical Ed Center 120
Mon - Thu
9:00a - 12:00p
3/18 - 3/21

Section requirement: registration packet and department approval required to register.

Tuition and fees: $0 (additional charges may apply)

VTEC 028
0 CR
Students will be able to safely operate a forklift, correctly use safety equipment and rigging, obtain OSHA 10 certification and obtain first aid and CPR certification.
CRN SECTION INSTRUCTOR MEETS
33061 J02 Justin Fantasia
Mon - Fri
9:00a - 4:30p
3/11 - 3/15

Prerequisite: Department approval required to register.

For more information or to register call (907) 796-6045. This course will result in 32 contact hours.

Tuition and fees: $0 (additional charges may apply)

VTEC 031
0 CR
This USCG approved course meets STCW requirements to refresh Basic Training for mariners lacking 360 days of sea time in the last five years. Beards must be clean shaven. Must provide a current USCG medical certificate, or current USCG physical.
CRN SECTION INSTRUCTOR MEETS
37623 K01 Mariah Warren
Ketchikan Regnl MT/Career Ctr 132
Tue, Thu, Fri
8:00a - 5:00p
3/19 - 3/22

This three day course is offered in conjunction with Basic Safety Training. Please call 228-4568 for more information.

Tuition and fees: $850 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
37624 K02 Mariah Warren
Ketchikan Regnl MT/Career Ctr 132
Wed, Thu, Fri
8:00a - 5:00p
3/27 - 3/29

This three day course is offered in conjunction with Basic Safety Training. Please call 228-4568 for more information.

Tuition and fees: $850 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
37625 K03 Mariah Warren
Ketchikan Regnl MT/Career Ctr 132
Wed, Fri
8:00a - 5:00p
3/5 - 3/8

This three day course is offered in conjunction with Basic Safety Training. Please call 228-4568 for more information.

Tuition and fees: $850 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
38666 K04 Mariah Warren
Ketchikan Regnl MT/Career Ctr 133
Tue, Wed, Thu
8:00a - 5:00p
2/12 - 2/14

No notes

Tuition and fees: $490 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
38880 K05 Mariah Warren
Ketchikan Regnl MT/Career Ctr 132
Mon, Tue, Fri
8:00a - 5:00p
4/8 - 4/12

No notes

Tuition and fees: $850 (additional charges may apply)

USCG approved four-hour Crowd Management (UNIVAS-142) training that meets the International Convention on Standards of Training, Certification and Watchkeeping (STCW). The basics of dealing with groups in an emergency situation on board passenger vessels is covered in detail.
CRN SECTION INSTRUCTOR MEETS
37447 K02 Mariah Warren
Ketchikan Regnl MT/Career Ctr 132
Saturday
8:00a - 12:00p
3/23 - 3/23

AMHS students only

Tuition and fees: $75 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
38419 K05 Mike LaBarge
Ketchikan Regnl MT/Career Ctr 132
Saturday
8:00a - 12:00p
4/6 - 4/6

AMHS students only

Tuition and fees: $75 (additional charges may apply)

This USCG-approved course meets the STCW requirements for revalidation of BT for mariners who have 360 days of qualifying sea time in the previous five years.
CRN SECTION INSTRUCTOR MEETS
37449 K01 Mariah Warren
Ketchikan Regnl MT/Career Ctr 133
Tue, Wed
8:00a - 5:00p
2/12 - 2/13
Ketchikan Regnl MT/Career Ctr 132
Tue, Wed
8:00a - 5:00p
2/12 - 2/13

Beards must be clean shaven for fire fighting. Students must provide a USCG medical certificate or USCG physical.

Tuition and fees: $490 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
37450 K02 Mariah Warren
Ketchikan Regnl MT/Career Ctr 132
Thu, Fri
8:00a - 5:00p
4/11 - 4/12
Ketchikan Regnl MT/Career Ctr 133
Thu, Fri
8:00a - 5:00p
4/11 - 4/12

Beards must be clean shaven for fire fighting. Students must provide a USCG medical certificate or USCG physical.

Tuition and fees: $490 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
38786 K03 Mariah Warren
Ketchikan Regnl MT/Career Ctr 132
Tue, Thu
8:00a - 5:00p
3/19 - 3/21

No notes

Tuition and fees: $490 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
38814 K04 Mariah Warren
Ketchikan Regnl MT/Career Ctr 132
Mon, Tue
8:00a - 5:00p
4/8 - 4/9
Ketchikan Regnl MT/Career Ctr 133
Mon, Tue
8:00a - 5:00p
4/8 - 4/9

Beards must be clean shaven for fire fighting. Students must provide a USCG medical certificate or USCG physical.

Tuition and fees: $490 (additional charges may apply)

Study at your own pace. The online material covers everything you need to know to pass the final exams. When you feel ready, make an appointment to take the final exams in Ketchikan or Juneau. For more information go to steadyoncourse.com and view the introduction to the course. Access to the online course lessons is available for 30 days after registering.
CRN SECTION INSTRUCTOR MEETS
37589 K01 Dale Miller,
Mike LaBarge
Arranged
1/14 - 5/4

No notes

Tuition and fees: $225 (additional charges may apply)

 

WELD Welding Technology

WELD 120Save 25%
3 CR
A beginning level course covering the fundamentals of oxyacetylene welding, brazing and cutting, and electric arc welding. Emphasis in flat and horizontal welding positions on mild steel using a variety of welding rods and techniques.
CRN SECTION INSTRUCTOR MEETS
36658 J01 Steffen Frazier
Welding Tech WELD
Tue, Thu
2:30p - 6:00p
1/15 - 2/28
Technical Ed Center 124
Tue, Thu
1:30p - 2:30p
1/15 - 2/28

No notes

Tuition and fees: $792 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
36722 K01 Kenneth Horn
Ketchikan Regnl MT/Career Ctr 116
Mon, Wed
5:30p - 8:30p
1/14 - 1/30
Ketchikan Regnl MT/Career Ctr 124
Mon, Wed
5:30p - 8:30p
2/4 - 5/4

Leather boots and head covering required.

Tuition and fees: $776 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
37472 T01 Allen Puckett
Sitka Campus HANGAR
Tue, Thu
6:30p - 9:00p
1/15 - 4/18

For more information students can go to: www.uas.alaska.edu/sitka/support.

Tuition and fees: $831 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

WELD 152Save 25%
3 CR
This intermediate level welding techniques course focuses on shielded metal arc welding - SMAW, plasma arc cutting, oxygen-acetylene cutting, and metal grinding. Students will develop intermediate welding skills including gas metal arc welding using flux core and dual shield wire fillers. A special emphasis will be placed on proper fit-up and alignment for fillet and V-groove welds in the flat, vertical, and overhead positions.
CRN SECTION INSTRUCTOR MEETS
33069 J01 Steffen Frazier
Technical Ed Center 124
Mon, Wed
5:15p - 6:30p
1/14 - 3/4
Welding Tech WELD
Mon, Wed
6:30p - 9:45p
1/14 - 3/4

Prerequisite: WELD S120 or instructor permission.

No notes

Tuition and fees: $792 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
36629 J02 Glenn Ramsey
Technical Ed Center 124
Tue, Thu
12:50p - 2:00p
3/19 - 4/25
Welding Tech WELD
Tue, Thu
2:00p - 6:15p
3/19 - 4/25

Prerequisite: WELD S120 or instructor permission.

No notes

Tuition and fees: $792 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
36723 K01 Kenneth Horn
Ketchikan Regnl MT/Career Ctr 116
Mon, Wed
5:30p - 8:30p
1/14 - 1/30
Ketchikan Regnl MT/Career Ctr 124
Mon, Wed
5:30p - 8:30p
2/4 - 5/4

Prerequisite: WELD S120 or instructor permission.

Leather boots and head covering required.

Tuition and fees: $776 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
36724 K02 Kenneth Horn
Ketchikan Regnl MT/Career Ctr 116
Tue, Thu
5:30p - 8:30p
1/14 - 1/24
Ketchikan Regnl MT/Career Ctr 124
Tue, Thu
5:30p - 8:30p
1/29 - 5/4

Prerequisite: WELD S120 or instructor permission.

Leather boots and head covering required.

Tuition and fees: $776 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
37473 T01 Allen Puckett
Sitka Campus HANGAR
Tue, Thu
6:30p - 9:00p
1/15 - 4/18

Prerequisite: WELD S120 or instructor permission.

For more information students can go to: www.uas.alaska.edu/sitka/support.

Tuition and fees: $831 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

WELD 175Save 25%
3 CR
Designed for advanced welders to further their skills in one or more processes and levels. Topics may include aluminum welding, sheet welding, shield metal arc welding, pipe welding, flux-core arc welding, or other to be announced. May be repeated for credit when content varies.
CRN SECTION INSTRUCTOR MEETS
33070 J01 Glenn Ramsey
Technical Ed Center 124
Mon, Wed
1:00p - 2:00p
3/18 - 4/29
Welding Tech WELD
Mon, Wed
2:00p - 6:00p
3/18 - 4/29

Prerequisite: WELD S120 or instructor permission.

No notes

Tuition and fees: $792 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
36725 K01 Kenneth Horn
Ketchikan Regnl MT/Career Ctr 116
Tue, Thu
5:30p - 8:30p
1/14 - 1/24
Ketchikan Regnl MT/Career Ctr 124
Tue, Thu
5:30p - 8:30p
1/29 - 5/4

Prerequisite: WELD S120 or instructor permission.

Leather boots and head covering required. Course will include aluminum welding and other processes.

Tuition and fees: $776 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
37474 T01 Allen Puckett
Sitka Campus HANGAR
Tue, Thu
6:30p - 9:00p
1/15 - 4/18

Prerequisite: WELD S120 or instructor permission.

For more information students can go to: www.uas.alaska.edu/sitka/support.

Tuition and fees: $831 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

 

DESL Diesel Technology

Designed for the owner/operator of a diesel engine in a boat, pick-up, or other application, this course will familiarize students with diesel engine operation, maintenance, and minor repairs. At least half of each class period is spent working on real diesel engines in our well equipped lab. No tools or previous mechanical experience is needed. Learn to be comfortable owning or operating your diesel engine.
CRN SECTION INSTRUCTOR MEETS
32815 J01 Steffen Frazier
Technical Ed Center 110
Tue, Thu
6:00p - 10:00p
3/5 - 4/25
Technical Ed Center 119
Tue, Thu
6:00p - 10:00p
3/5 - 4/25

Pass/Fail grading.

No notes

Tuition and fees: $801 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
36608 K01 Lawrence O'Loane
Ketchikan Regnl MT/Career Ctr 123
Saturday
9:00a - 1:00p
2/26 - 4/13
Ketchikan Regnl MT/Career Ctr 116
Saturday
9:00a - 1:00p
2/26 - 4/13
Ketchikan Regnl MT/Career Ctr 116
Tue, Thu
5:30p - 8:30p
2/26 - 4/13
Ketchikan Regnl MT/Career Ctr 123
Tue, Thu
5:30p - 8:30p
2/26 - 4/13

Pass/Fail grading.

No notes

Tuition and fees: $835 (additional charges may apply)

DESL 107
4 CR
Diesel injection systems will be covered in detail including mechanical pumps and injectors through current electronic common rail fuel systems. Diesel emission control systems and diesel intake air systems will also be covered. Introduction to essential electronic theory including use of scan tools in the diagnostic process combined with use of Internet-based service information systems.
CRN SECTION INSTRUCTOR MEETS
32816 J01 Tom Dolan
Technical Ed Center 110
Mon, Wed
1:00p - 5:15p
1/14 - 3/6
Technical Ed Center 116
Mon, Wed
1:00p - 5:15p
1/14 - 3/6
Technical Ed Center 119
Mon, Wed
1:00p - 5:15p
1/14 - 3/6

Prerequisite: DESL S121 or AUTO S121 or instructor permission.

No notes

Tuition and fees: $1168 (additional charges may apply)

DESL 125Save 25%
3 CR
Basic laws governing hydraulic design, layout and application. Introduction to components to include: disassembly and reassembly of pumps, motors, control valves and cylinders. Understanding of hoses, pipe fittings, seals and gaskets.
CRN SECTION INSTRUCTOR MEETS
36664 J02 Neil Voelckers
Technical Ed Center 119
Tue, Thu
9:00a - 12:30p
1/15 - 2/28
Technical Ed Center 110
Tue, Thu
9:00a - 12:30p
1/15 - 2/28
Technical Ed Center 116
Tue, Thu
9:00a - 12:30p
1/15 - 2/28

No notes

Tuition and fees: $742 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

DESL 180Save 25%
3 CR
Study of AC power generation methods used in marine and industrial applications. The interface of diesel engines to power generation is strongly emphasized. Covers AC generation theory, safety, regulation, installation, troubleshooting, and repair of the types of units commonly used in Southeast Alaska.
CRN SECTION INSTRUCTOR MEETS
32818 J01 Neil Voelckers
Technical Ed Center 116
Saturday
9:00a - 1:00p
1/14 - 5/4
Technical Ed Center 119
Saturday
9:00a - 1:00p
1/14 - 5/4
Technical Ed Center 110
Saturday
9:00a - 1:00p
1/14 - 5/4

Prerequisite: AUTO S121/DESL S121.

No notes

Tuition and fees: $742 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

DESL 193P
1 CR
Introduction to fluid power. Controls, pumps, motors and actuators will be discussed. Reading of hydraulic symbols and schematics will be stressed. Assembly and operation of elementary hydraulic circuits in a hydraulic lab.
CRN SECTION INSTRUCTOR MEETS
36611 K03 Lawrence O'Loane
Ketchikan Regnl MT/Career Ctr 123
Mon, Wed
5:30p - 8:30p
4/8 - 4/24
Ketchikan Regnl MT/Career Ctr 116
Mon, Wed
5:30p - 8:30p
4/8 - 4/24

Pass/Fail grading.

No notes

Tuition and fees: $270 (additional charges may apply)

DESL 193P
3 CR
This course is intended for mariners studying for the USCG Junior Engineer exam. Main topics related to the USCG exam will be covered in class and study material will be provided. After finishing the course, students must take and pass the USCG Junior Engineer exam at a USCG Regional Exam Center in order to obtain the Junior Engineer rating. Taking this course does not guarantee the student will pass the USCG exam.
CRN SECTION INSTRUCTOR MEETS
36609 K01 Lawrence O'Loane
Paul Building 105
Mon - Fri
9:00a - 11:59a
2/11 - 2/22
Paul Building 515
Mon - Fri
1:00p - 4:00p
2/11 - 2/22

Pass/Fail grading.

No notes

Tuition and fees: $735 (additional charges may apply)

An overview of refrigeration systems, theory and application. Special emphasis on preparation for the EPA 608 examination.
CRN SECTION INSTRUCTOR MEETS
38531 K04 Lawrence O'Loane
Ketchikan Regnl MT/Career Ctr 133
Mon - Thu
5:30p - 9:30p
2/4 - 2/7

Pass/Fail grading.

No notes

Tuition and fees: $245 (additional charges may apply)

DESL 225Save 25%
3 CR
Advanced hydraulics systems incorporating variable displacement pumps, proportional control valves, hydraulic load sensing systems, and hydrostatic power trains. Schematic interpretation, testing, and adjusting of hydraulic and electronic controls are emphasized. Course includes classroom and hands-on labs.
CRN SECTION INSTRUCTOR MEETS
32819 J01 Tom Dolan
Technical Ed Center 119
Tue, Thu
1:00p - 5:00p
3/5 - 3/7
Technical Ed Center 116
Tue, Thu
1:00p - 5:00p
3/5 - 3/7
Technical Ed Center 110
Tue, Thu
1:00p - 5:00p
3/5 - 3/7
Technical Ed Center 119
Tue, Thu
1:00p - 5:00p
3/19 - 4/25
Technical Ed Center 116
Tue, Thu
1:00p - 5:00p
3/19 - 4/25
Technical Ed Center 110
Tue, Thu
1:00p - 5:00p
3/19 - 4/25

Prerequisite: DESL S125 or concurrent enrollment.

No notes

Tuition and fees: $742 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

An in-depth study of the various types of braking systems used in current trucks and heavy equipment applications. This course also prepares the student to take the State of Alaska Commercial Driver's License (CDL) "class B" written exam and obtain a 2-year CDL temporary learner's permit.
CRN SECTION INSTRUCTOR MEETS
36620 J01 Tom Dolan
Technical Ed Center 110
Mon, Wed
6:00p - 9:00p
1/14 - 3/4
Technical Ed Center 116
Mon, Wed
6:00p - 9:00p
1/14 - 3/4
Technical Ed Center 119
Mon, Wed
6:00p - 9:00p
1/14 - 3/4

No notes

Tuition and fees: $528 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

DESL 255Save 25%
2 CR
A thorough study of heavy equipment frames and suspension systems and their components. Adjustments, repairs and cautions along with tire and track alignments.
CRN SECTION INSTRUCTOR MEETS
32821 J01 Neil Voelckers
Technical Ed Center 110
Mon, Wed
1:30p - 4:30p
3/18 - 4/29
Technical Ed Center 116
Mon, Wed
1:30p - 4:30p
3/18 - 4/29
Technical Ed Center 119
Mon, Wed
1:30p - 4:30p
3/18 - 4/29

No notes

Tuition and fees: $528 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

DESL 260Save 25%
3 CR
Basic operation and repair of heavy equipment components from the flywheel to the wheels or tracks: clutches, transmissions, transfer cases, differentials, multi-speed rear ends, and final drives.
CRN SECTION INSTRUCTOR MEETS
32822 J01 Tom Dolan
Technical Ed Center 110
Mon, Wed
6:00p - 10:00p
3/18 - 4/29
Technical Ed Center 116
Mon, Wed
6:00p - 10:00p
3/18 - 4/29
Technical Ed Center 119
Mon, Wed
6:00p - 10:00p
3/18 - 4/29

No notes

Tuition and fees: $742 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

DESL 261Save 25%
3 CR
Mechanical and electrical systems on pleasure and commercial vessels. Includes engine installation, shaft alignment, propeller calculation, fuel and water systems, and other marine system design and installation. Should be taken concurrently with DESL S262.
CRN SECTION INSTRUCTOR MEETS
32823 J01 Neil Voelckers
Technical Ed Center 119
Friday
9:30a - 12:30p
1/14 - 5/4

No notes

Tuition and fees: $642 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

DESL 262Save 25%
2 CR
Supplements DESL S261 with specific exercises. Engine, shaft and propeller, exhaust, electrical and other systems are designed, installed and tested. Should be taken concurrently with DESL S261.
CRN SECTION INSTRUCTOR MEETS
32824 J01 Neil Voelckers
Technical Ed Center 110
Friday
1:30p - 5:30p
1/14 - 5/4
Technical Ed Center 116
Friday
1:30p - 5:30p
1/14 - 5/4

Pass/Fail grading.

No notes

Tuition and fees: $528 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

DESL 291
3 CR
CRN SECTION INSTRUCTOR MEETS
32825 J01 Tom Dolan
Arranged
1/14 - 5/4

Pass/Fail grading.

Section requirement: Instructor approval required for registration. Contact your advisor to arrange internship.

Tuition and fees: $901 (additional charges may apply)

 

Note: courses may take up to a minute to load.

View Full UAS Schedule

2019 Summer Classes

 
 
 
 

Note: courses may take up to a minute to load.

View Full UAS Schedule

2019 Fall Classes

MTR Marine Transportation

MTR 119
1 CR
Learn to safely operate a small vessel in Alaskan waters. Covers navigation, rules of the road, trip planning including weather, radio operation, line handling and vessel operation including a practice session on the water. Foul weather/rain gear may be required.
CRN SECTION INSTRUCTOR MEETS
76914 T01 Joel Markis
Sitka Campus 115
Mon, Tue, Wed
8:00a - 5:00p
9/23 - 9/25

Seats remaining: 15

No notes

Tuition and fees: $462 (additional charges may apply)

MTR 120Save 25%
1 CR
An introduction to outboard systems that need maintenance and upkeep for efficient operation. Ignition, carburetion power head and lower unit systems will be studied emphasizing preventive maintenance.
CRN SECTION INSTRUCTOR MEETS
76915 T01 Gary Den Herder
Sitka Campus 115
Mon, Tue, Wed
8:00a - 5:00p
9/30 - 10/2

Seats remaining: 15

No notes

Tuition and fees: $406 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

MTR 129Save 25%
2 CR
This US Coast Guard approved course meets the requirements of the International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW) 95. The four modules of the course are Personal Survival, Basic Fire Fighting, First Aid/CPR, and Personal Safety & Social Responsibility. Beards must be shaven to insure a good Self Contained Breathing Apparatus (SCBA) face mask seal.
CRN SECTION INSTRUCTOR MEETS
77567 K01 Mariah Warren
Ketchikan Regnl MT/Career Ctr 135
Mon - Fri
8:00a - 5:00p
10/14 - 10/18
Ketchikan Regnl MT/Career Ctr 116
Mon - Fri
8:00a - 5:00p
10/14 - 10/18

Seats remaining: 20

Prerequisite: Must have a doctor's approval to physically demonstrate practical competencies, and must pass an English proficiency exam.

This class is part of a cohort. Students must register for all courses in the cohort with the exception of this course, which they may omit if previously taken.

Tuition and fees: $402 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
77583 K02 Mariah Warren
Ketchikan Regnl MT/Career Ctr 135
Mon - Fri
8:00a - 5:00p
10/21 - 10/25

Seats remaining: 20

Prerequisite: Must have a doctor's approval to physically demonstrate practical competencies, and must pass an English proficiency exam.

No notes

Tuition and fees: $1012 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
77752 K03 Mariah Warren
Ketchikan Regnl MT/Career Ctr 116
Mon - Fri
8:00a - 5:00p
10/14 - 10/18
Ketchikan Regnl MT/Career Ctr 135
Mon - Fri
8:00a - 5:00p
10/14 - 10/18

Seats remaining: 20

Prerequisite: Must have a doctor's approval to physically demonstrate practical competencies, and must pass an English proficiency exam.

No notes

Tuition and fees: $402 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

An overview of the theory and practice of electrical circuits as applied to alternating and direct current. Provides an introduction to basic electrical theory, circuit fundamentals and practical wiring techniques, and theory of operation and use of VOM meters. Includes marine applications of power generation and power distribution systems.
CRN SECTION INSTRUCTOR MEETS
77163 K01 Lawrence O'Loane
Ketchikan Regnl MT/Career Ctr 116
Mon - Fri
9:00a - 4:00p
11/18 - 11/26
Ketchikan Regnl MT/Career Ctr 123
Mon - Fri
9:00a - 4:00p
11/18 - 11/26

Seats remaining: 12

This class is part of a cohort. Students must register for all courses in the cohort with the exception of MTR 129, Basic Safety Training, which they may omit if previously taken.

Tuition and fees: $796 (additional charges may apply)

An overview of ship design and construction including ship nomenclature, fittings, and equipment. Ship layout and operation to include tanks, valves, piping systems and boilers.
CRN SECTION INSTRUCTOR MEETS
77160 K01 Lawrence O'Loane
Ketchikan Regnl MT/Career Ctr 123
Mon - Fri
9:00a - 12:00p
9/16 - 9/24
Ketchikan Regnl MT/Career Ctr 116
Mon - Fri
9:00a - 12:00p
9/16 - 9/24

Seats remaining: 12

This class is part of a cohort. Students must register for all courses in the cohort with the exception of MTR 129, Basic Safety Training, which they may omit if previously taken.

Tuition and fees: $357 (additional charges may apply)

MTR 220Save 25%
2 CR
This U.S. Coast Guard approved course provides training in the use of lifeboats, life rafts and survival gear. It meets the requirements of 46 CFR 12.10-3(a)(6) and 46 CFR 12.10-5 for endorsement for Lifeboatman. It also meets the requirements of Section A-VI/2 and Table A-VI/2-1 of the Standards of Training, Certification and Watchkeeping for Seafarers (STCW) 95. Rain gear may be needed for outside drills.
CRN SECTION INSTRUCTOR MEETS
77585 K01 Mariah Warren
Ketchikan Regnl MT/Career Ctr 132
Mon - Thu
8:00a - 5:00p
12/9 - 12/12

Seats remaining: 24

Students must provide personal foul weather gear appropriate for the marine environment.

Tuition and fees: $737 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

MTR 225Save 25%
2 CR
Students will learn rules of the road, ship nomenclature, knots, splices and general seamanship topics. This course is approved for third party testing. A UAS certificate of completion is accepted as a substitute for testing by the U.S. Coast Guard.
CRN SECTION INSTRUCTOR MEETS
77608 KD1 Neil Nickerson
Mon - Fri
8:00a - 5:00p
12/2 - 12/6
Ketchikan Regnl MT/Career Ctr 135
Mon - Fri
8:00a - 5:00p
12/2 - 12/6

Seats remaining: 16

Prerequisite: MTR S220 (formerly offered as MT S230) or instructor permission.

Course is offered via video conference. Student must be located in Juneau or Ketchikan.

Tuition and fees: $588 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

This U.S. Coast Guard approved course satisfies the Standards of Training and Certification of Watchkeeping (STCW) 95 for Ratings Forming Part of a Navigation Watch. Included in the course are helm commands and duties of a mariner on a navigation watch.
CRN SECTION INSTRUCTOR MEETS
77528 K01 Mike LaBarge
Ketchikan Regnl MT/Career Ctr 136
Mon, Tue, Wed
8:00a - 5:00p
11/4 - 11/6
Ketchikan Regnl MT/Career Ctr 135
Mon, Tue, Wed
8:00a - 5:00p
11/4 - 11/6

Seats remaining: 12

No notes

Tuition and fees: $406 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

MTR 228Save 25%
2 CR
Required for persons assigned to operate Fast Rescue Boats. It is USCG approved and meets the requirements for Standards, Training and Certification of Watchkeeping (STCW) 95. Much of the class time is spent operating a fast rescue boat on the water. Requires prior experience handling a skiff, warm clothing and rain gear.
CRN SECTION INSTRUCTOR MEETS
77586 K01 Mariah Warren
Ketchikan Regnl MT/Career Ctr 135
Mon - Fri
8:00a - 5:00p
9/30 - 10/4

Seats remaining: 10

Students must provide personal foul weather gear appropriate for the marine environment.

Tuition and fees: $1112 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

This course and instructor have been approved by the US Coast Guard for third party testing. A UAS certificate of completion is accepted as a substitute for testing by the Coast Guard. Depending on sea experience and other Coast Guard requirements, a person passing this course is eligible to receive an Operator of Uninspected Passenger Vessel (OUPV, commonly called a 6-pack license) up to a Master 100 Gross Ton license.
CRN SECTION INSTRUCTOR MEETS
77526 K01 Mike LaBarge
Ketchikan Regnl MT/Career Ctr 136
Mon - Thu
5:30p - 8:30p
9/3 - 10/23
Ketchikan Regnl MT/Career Ctr 135
Mon - Thu
5:30p - 8:30p
9/3 - 10/23

Seats remaining: 16

No notes

Tuition and fees: $1080 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

This course and instructor have been approved by the US Coast Guard for third party testing. A UAS certificate of completion is accepted as a substitute for testing by the Coast Guard. Depending on sea experience and other Coast Guard requirements, a person passing this course is eligible to receive an Operator of Uninspected Passenger Vessel (OUPV, commonly called a 6-pack license) up to a Master 100 Gross Ton license.
CRN SECTION INSTRUCTOR MEETS
77606 K02 Neil Nickerson
Tue, Wed, Thu
6:00p - 9:00p
10/1 - 11/14
Saturday
8:00a - 5:00p
10/5 - 10/12

Seats remaining: 16

This class is located in Juneau.

Tuition and fees: $1005 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

MTR 240Save 25%
2 CR
Intended for mariners with a USCG 100 Ton Master's license who want to upgrade to a 200 Ton license. The course and instructor are USCG approved for testing in class. Subjects covered are chart plotting, regulations, stability, power plants and vessel construction.
CRN SECTION INSTRUCTOR MEETS
77607 KD1 Neil Nickerson
Mon, Tue, Wed
8:00a - 5:00p
11/18 - 11/20
Ketchikan Regnl MT/Career Ctr 132
Mon, Tue, Wed
8:00a - 5:00p
11/18 - 11/20

Seats remaining: 16

Prerequisite: MTR S239 or USCG Master's license.

Course offered via video conference. Student must be located in either Juneau or Ketchikan.

Tuition and fees: $550 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

MTR 242Save 25%
2 CR
Marine firefighting preparedness and response leadership. Subjects include fire prevention, ship organization, damage control and stability. This course is USCG approved and meets the Standards of Training and Certification of Watchkeeping (STCW) 95.
CRN SECTION INSTRUCTOR MEETS
77529 K01 Andrew Tighe
Ketchikan Regnl MT/Career Ctr 135
Mon - Thu
8:00a - 4:59p
11/11 - 11/14

Seats remaining: 12

Prerequisite: MTR S129 or a certificate in Basic Fire Fighting.

No notes

Tuition and fees: $402 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

Intended for mariners responsible for cargo and the safety of passengers in emergency situations. It meets the Crisis Management and Human Behavior requirements of Standards, Training and Certification of Watchkeeping (STCW) 95 including Roll On Roll Off (Ro-Ro) passenger vessels.
CRN SECTION INSTRUCTOR MEETS
77530 K01 Mike LaBarge
Ketchikan Regnl MT/Career Ctr 135
Mon, Tue
8:00a - 5:00p
10/28 - 10/29

Seats remaining: 20

Prerequisite: Requires US Coast Guard approved certificate of completion in Crowd Management, or instructor approval.

No notes

Tuition and fees: $306 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

MTR 250Save 25%
2 CR
U.S. Coast Guard approved course provides training in basic radar theory. Topics include navigation and collision avoidance. Great emphasis is placed on plotting techniques. Radar Observer utilizes the Nautilus Educational Systems (NRAS) radar simulator. Meets the requirements for uninspected tow vessels greater than 26 feet.
CRN SECTION INSTRUCTOR MEETS
77596 K01 Dale Miller
Ketchikan Regnl MT/Career Ctr 136
Mon - Fri
8:00a - 5:00p
11/18 - 11/22
Ketchikan Regnl MT/Career Ctr 135
Mon - Fri
8:00a - 5:00p
11/18 - 11/22

Seats remaining: 11

No notes

Tuition and fees: $812 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
77531 K01 Dale Miller
Ketchikan Regnl MT/Career Ctr 136
Tue - Fri
8:00a - 5:00p
12/3 - 12/6

Seats remaining: 10

Prerequisite: MTR S232 or US Coast Guard license with Radar Observer endorsement.

No notes

Tuition and fees: $662 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

Basic concepts of celestial navigation and nautical astronomy. Definitions and solutions of the astronomical triangle utilizing H.O. 249 will be emphasized for practical application in the off shore navigation environment utilizing the marine-type sextant.
CRN SECTION INSTRUCTOR MEETS
77610 K01 Neil Nickerson
Tue, Wed, Thu
6:00p - 9:00p
9/10 - 9/19

Seats remaining: 15

This course is located in Juneau.

Tuition and fees: $305 (additional charges may apply)

 

VTEC Vocational Technology, NonCred

This class is intended for mariners who require first aid/CPR/AED for licensing/credentialing purposes, although members of the general public may also take the course. This class and instructor are USCG approved and students completing will receive a USCG accepted certificate of completion as well as the standard American Heart Association First Aid/CPR/AED credential.
CRN SECTION INSTRUCTOR MEETS
77609 K01 Neil Nickerson
Saturday
9:00a - 3:00p
11/16 - 11/16

Seats remaining: 12

This class is located in Juneau.

Tuition and fees: $95 (additional charges may apply)

VTEC 020
0 CR
Drop in time for practice projects. Three hours per session. Contact instructor for additional information at 228-4571.
CRN SECTION INSTRUCTOR MEETS
76843 K01 Kenneth Horn
Ketchikan Regnl MT/Career Ctr 124
8/26 - 12/14

Seats remaining: 8

No notes

Tuition and fees: $90 (additional charges may apply)

VTEC 031
0 CR
This USCG approved course meets STCW requirements to refresh Basic Safety Training for mariners lacking 360 days of sea time in the last five years. Beards must be shaven. Must provide a current USCG medical certificate, or current USCG physical.
CRN SECTION INSTRUCTOR MEETS
77569 K01 Mariah Warren
10/14 - 10/18

Seats remaining: 20

No notes

Tuition and fees: $850 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
77584 K02 Mariah Warren
10/21 - 10/25

Seats remaining: 20

No notes

Tuition and fees: $850 (additional charges may apply)

VTEC 032
0 CR
USCG approved four hour Crowd Management (UNIVAS-142) training that meets the International Convention on Standards of Training, Certification and Watchkeeping (STCW). The basics of dealing with groups in an emergency situation on board passenger vessels is covered in detail.
CRN SECTION INSTRUCTOR MEETS
77587 K01 Mariah Warren
Ketchikan Regnl MT/Career Ctr 132
Saturday
8:00a - 12:00p
10/19 - 10/19

Seats remaining: 24

No notes

Tuition and fees: $75 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
77588 K02 Mariah Warren
Ketchikan Regnl MT/Career Ctr 132
Saturday
8:00a - 12:00p
10/26 - 10/26

Seats remaining: 24

No notes

Tuition and fees: $75 (additional charges may apply)

This USCG approved course meets the STCW requirements for revalidation of BT for mariners who have 360 days of qualifying sea time in the previous five years. Beards must be clean shaven for fire fighting. Students must provide a USCG medical certificate, or USCG physical.
CRN SECTION INSTRUCTOR MEETS
77592 K01 Mariah Warren
Ketchikan Regnl MT/Career Ctr 132
Thu, Fri
8:00a - 5:00p
11/7 - 11/8

Seats remaining: 24

No notes

Tuition and fees: $490 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
77595 K02 Mariah Warren
Ketchikan Regnl MT/Career Ctr 132
Thu, Fri
8:00a - 5:00p
11/21 - 11/22

Seats remaining: 24

No notes

Tuition and fees: $490 (additional charges may apply)

This class is for students who need to renew their USCG Radar Endorsement. Course duration is 1-3 days, depending on how much review is required for the student to complete the material and test.
CRN SECTION INSTRUCTOR MEETS
77597 K01 Dale Miller
Ketchikan Regnl MT/Career Ctr 135
Tue, Wed, Thu
8:00a - 5:00p
11/19 - 11/21
Ketchikan Regnl MT/Career Ctr 136
Tue, Wed, Thu
8:00a - 5:00p
11/19 - 11/21

Seats remaining: 12

No notes

Tuition and fees: $0 (additional charges may apply)

Study at your own pace. The online material covers everything you need to know to pass the final exams. When you feel ready, make an appointment to take the final exams in Ketchikan or Juneau. For more information go to steadyoncourse.com and view the introduction to the course. Access to the online course lessons is available for 30 days after registering. For additional information, call 907-228-4568.
CRN SECTION INSTRUCTOR MEETS
77527 K01 Mike LaBarge
Arranged
8/26 - 12/14

Seats remaining: 20

No notes

Tuition and fees: $225 (additional charges may apply)

 

WELD Welding Technology

WELD 120Save 25%
3 CR
A beginning level course covering the fundamentals of oxyacetylene welding, brazing and cutting, and electric arc welding. Emphasis in flat and horizontal welding positions on mild steel using a variety of welding rods and techniques.
CRN SECTION INSTRUCTOR MEETS
70382 J01 Steffen Frazier
Technical Ed Center 124
Tue, Thu
6:00p - 10:30p
8/27 - 10/10
Welding Tech WELD
Tue, Thu
6:00p - 10:30p
8/27 - 10/10

Seats remaining: 11

No notes

Tuition and fees: $819 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
70383 J02 Steffen Frazier
Technical Ed Center 124
Tue, Thu
6:00p - 10:30p
10/15 - 12/3
Welding Tech WELD
Tue, Thu
6:00p - 10:30p
10/15 - 12/3

Seats remaining: 12

No notes

Tuition and fees: $819 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
76658 K01 Kenneth Horn
Ketchikan Regnl MT/Career Ctr 116
Mon, Wed
5:30p - 8:30p
8/26 - 9/18
Ketchikan Regnl MT/Career Ctr 124
Mon, Wed
5:30p - 8:30p
8/26 - 12/14

Seats remaining: 12

Boots and head cover are required.

Tuition and fees: $803 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
77165 K02 Kenneth Horn
Ketchikan Regnl MT/Career Ctr 124
Mon - Fri
1:00p - 4:30p
9/16 - 10/11
Ketchikan Regnl MT/Career Ctr 116
Mon - Fri
1:00p - 4:30p
9/16 - 10/11

Seats remaining: 12

This class is part of a cohort. Students must register for all courses in the cohort with the exception of MTR 129, Basic Safety Training, which they may omit if previously taken.

Tuition and fees: $753 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
76418 T01 Allen Puckett
Sitka Campus HANGAR
Tue, Thu
6:30p - 9:00p
9/17 - 12/12

Seats remaining: 6

For more information students can go to: www.uas.alaska.edu/sitka/support.

Tuition and fees: $858 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

WELD 152Save 25%
3 CR
This intermediate level welding techniques course focuses on shielded metal arc welding - SMAW, plasma arc cutting, oxygen-acetylene cutting, and metal grinding. Students will develop intermediate welding skills including gas metal arc welding using flux core and dual shield wire fillers. A special emphasis will be placed on proper fit-up and alignment for fillet and V-groove welds in the flat, vertical, and overhead positions.
CRN SECTION INSTRUCTOR MEETS
77650 J01 Steffen Frazier
Welding Tech WELD
Mon, Wed
6:30p - 10:45p
10/14 - 12/3
Technical Ed Center 124
Mon, Wed
6:00p - 6:30p
10/14 - 12/3

Seats remaining: 11

Prerequisite: WELD S120 or instructor permission.

No notes

Tuition and fees: $744 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
76659 K01 Kenneth Horn
Ketchikan Regnl MT/Career Ctr 116
Tue, Thu
5:30p - 8:30p
8/26 - 9/19
Ketchikan Regnl MT/Career Ctr 124
Tue, Thu
5:30p - 8:30p
8/26 - 12/14

Seats remaining: 12

Prerequisite: WELD S120 or instructor permission.

Boots and head cover are required.

Tuition and fees: $803 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
76419 T01 Allen Puckett
Sitka Campus HANGAR
Tue, Thu
6:30p - 9:00p
9/17 - 12/12

Seats remaining: 6

Prerequisite: WELD S120 or instructor permission.

For more information students can go to: www.uas.alaska.edu/sitka/support.

Tuition and fees: $858 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

WELD 175Save 25%
3 CR
Designed for advanced welders to further their skills in one or more processes and levels. Topics may include aluminum welding, sheet welding, shield metal arc welding, pipe welding, flux-core arc welding, or other to be announced. May be repeated for credit when content varies.
CRN SECTION INSTRUCTOR MEETS
76660 K01 Kenneth Horn
Ketchikan Regnl MT/Career Ctr 116
Tue, Thu
5:30p - 8:30p
8/26 - 9/19
Ketchikan Regnl MT/Career Ctr 124
Tue, Thu
5:30p - 8:30p
8/26 - 12/14

Seats remaining: 12

Prerequisite: WELD S120 or instructor permission.

Boots and head cover are required.

Tuition and fees: $803 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
76420 T01 Allen Puckett
Sitka Campus HANGAR
Tue, Thu
6:30p - 9:00p
9/17 - 12/12

Seats remaining: 5

Prerequisite: WELD S120 or instructor permission.

No notes

Tuition and fees: $858 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

 

DESL Diesel Technology

Prepares students to effectively perform visual inspections and preventative maintenance operations at different levels on machines. Also covers proper lubricants, fluids, and fittings. Types and uses of machines, proper tooling, basic mechanical systems, and safety are stressed. Introduction to various machine systems and adjustments are included.
CRN SECTION INSTRUCTOR MEETS
70151 J01 Tom Dolan
Technical Ed Center 124
Friday
10:30a - 5:00p
8/30 - 10/11
Technical Ed Center 116
Friday
10:30a - 5:00p
8/30 - 10/11
Technical Ed Center 110
Friday
10:30a - 5:00p
8/30 - 10/11

Seats remaining: 15

No notes

Tuition and fees: $571 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

DESL 110Save 25%
6 CR
This course covers all aspects of diesel engines that are used in modern heavy equipment including marine, truck and stationary applications. Troubleshooting, repair, parts reuse, and engine rebuilding are included. One full day each week is spent in the lab rebuilding a diesel engine. Students can bring their own diesel engine to rebuild with the permission of the instructor.
CRN SECTION INSTRUCTOR MEETS
70152 J01 Neil Voelckers
Technical Ed Center 110
Wednesday
9:00a - 4:00p
8/26 - 12/14
Technical Ed Center 124
Monday
9:00a - 11:45a
8/26 - 12/14

Seats remaining: 16

Wednesday meetings include one-half hour lunch.

Tuition and fees: $1513 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
77162 K01 Lawrence O'Loane
Ketchikan Regnl MT/Career Ctr 123
Mon - Fri
8:00a - 5:00p
10/21 - 11/8
Ketchikan Regnl MT/Career Ctr 116
Mon - Fri
8:00a - 5:00p
10/21 - 11/8

Seats remaining: 12

This class is part of a cohort. Students must register for all courses in the cohort with the exception of MTR 129, Basic Safety Training, which they may omit if previously taken.

Tuition and fees: $1206 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

DESL 121Save 25%
3 CR
Covers history and origins of electrical theory through the generation of electricity. Includes diagnosis, minor repair and general service of alternators, starters and batteries.
CRN SECTION INSTRUCTOR MEETS
70154 J01 Tom Dolan
Technical Ed Center 119
Tue, Thu
6:00p - 10:00p
8/27 - 11/10
Technical Ed Center 110
Tue, Thu
6:00p - 10:00p
8/27 - 11/10
Technical Ed Center 116
Tue, Thu
6:00p - 10:00p
8/27 - 11/10

Seats remaining: 16

No notes

Tuition and fees: $754 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

DESL 125Save 25%
3 CR
Basic laws governing hydraulic design, layout and application. Introduction to components to include: disassembly and reassembly of pumps, motors, control valves and cylinders. Understanding of hoses, pipe fittings, seals and gaskets.
CRN SECTION INSTRUCTOR MEETS
77164 K01 Lawrence O'Loane
Ketchikan Regnl MT/Career Ctr 116
Mon - Fri
9:00a - 4:00p
11/11 - 11/15
Ketchikan Regnl MT/Career Ctr 123
Mon - Fri
9:00a - 4:00p
11/11 - 11/15
Ketchikan Regnl MT/Career Ctr 123
Mon - Fri
9:00a - 4:00p
12/2 - 12/6
Ketchikan Regnl MT/Career Ctr 116
Mon - Fri
9:00a - 4:00p
12/2 - 12/6

Seats remaining: 12

This class is part of a cohort. Students must register for all courses in the cohort with the exception of MTR 129, Basic Safety Training, which they may omit if previously taken.

Tuition and fees: $603 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

DESL 130Save 25%
2 CR
This class will cover application, system operations, maintenance and safety principals of refrigeration. Students will learn about components making up a refrigerant. Troubleshooting and avoiding common problems included.
CRN SECTION INSTRUCTOR MEETS
70155 J01 Neil Voelckers
Technical Ed Center 110
Mon, Fri
6:00p - 9:15p
10/21 - 12/3
Technical Ed Center 116
Mon, Fri
6:00p - 9:15p
10/21 - 12/3
Technical Ed Center 119
Mon, Fri
6:00p - 9:15p
10/21 - 12/3

Seats remaining: 15

No notes

Tuition and fees: $571 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

CRN SECTION INSTRUCTOR MEETS
77161 K01 Lawrence O'Loane
Ketchikan Regnl MT/Career Ctr 123
Mon - Fri
9:00a - 12:00p
9/25 - 10/11
Ketchikan Regnl MT/Career Ctr 116
Mon - Fri
9:00a - 12:00p
9/25 - 10/11

Seats remaining: 12

This class is part of a cohort. Students must register for all courses in the cohort with the exception of MTR 129, Basic Safety Training, which they may omit if previously taken.

Tuition and fees: $402 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

DESL 131
3 CR
Theory, diagnosis, and repair of automotive electrical systems, to include testing tools, schematics, and computers.
CRN SECTION INSTRUCTOR MEETS
70156 J01 Tom Dolan
Technical Ed Center 119
Tue, Thu
6:00p - 10:00p
10/15 - 12/3
Technical Ed Center 116
Tue, Thu
6:00p - 10:00p
10/15 - 12/3
Technical Ed Center 110
Tue, Thu
6:00p - 10:00p
10/15 - 12/3

Seats remaining: 18

Prerequisite: DESL S121 or concurrent enrollment.

No notes

Tuition and fees: $937 (additional charges may apply)

Provides the fundamentals for using precision measuring tools such as micrometers and dial indicators, as well as lasers used in leveling and alignment. Also covers the use of testing instruments including digital multimeters, tachometers, with an introduction to thermal imaging.
CRN SECTION INSTRUCTOR MEETS
77736 J01 Steffen Frazier
Technical Ed Center 124
Tue, Thu
2:00p - 3:00p
8/27 - 10/8
Welding Tech WELD
Tue, Thu
3:00p - 5:00p
8/27 - 10/8

Seats remaining: 16

No notes

Tuition and fees: $658 (additional charges may apply)

Learn the industrial skills needed for safely lifting and moving heavy objects and equipment of different shapes, sizes and weights. The different tools and equipment needed to perform this type of work safely will be taught in theory and practice.
CRN SECTION INSTRUCTOR MEETS
77737 J01 Steffen Frazier
Welding Tech WELD
Tue, Thu
3:00p - 5:00p
10/10 - 11/21
Technical Ed Center 124
Tue, Thu
2:00p - 3:00p
10/10 - 11/21

Seats remaining: 16

No notes

Tuition and fees: $658 (additional charges may apply)

DESL 263Save 25%
3 CR
A study in the operation, maintenance and repair of marine transmissions and other shipboard gearing units like winches and stern drives.
CRN SECTION INSTRUCTOR MEETS
70157 J01 Neil Voelckers
Technical Ed Center 119
Tuesday
10:00a - 3:00p
8/26 - 12/14
Technical Ed Center 110
Tuesday
10:00a - 3:00p
8/26 - 12/14
Technical Ed Center 116
Tuesday
10:00a - 3:00p
8/26 - 12/14

Seats remaining: 18

Course meeting times include one-half hour for lunch.

Tuition and fees: $754 (additional charges may apply)

Save 25% off tuition on over 300 selected career and technical courses.

DESL 291
3 CR
CRN SECTION INSTRUCTOR MEETS
70158 J01 Tom Dolan
Arranged
8/26 - 12/14

Seats remaining: 25

Pass/Fail grading.

Section requirement: a signed Special Course Contract and instructor approval required to register. Internships are experience-based courses that place a student in an organization under the supervision of both a qualified professional on the site and a faculty member from the academic discipline. Students must be admitted to a university program, and show educational preparedness for the internship and its connection to their academic goals.

Tuition and fees: $837 (additional charges may apply)

DESL 293P
3 CR
Builds on all previously offered diesel courses. This years projects will include: airbrake valve and plumbing installation, wheel bearing replacement and the rebuilding of rear-end, PTO and hydraulic valve work on two trucks, and driver safety accessory's on a highway tractor.
CRN SECTION INSTRUCTOR MEETS
70159 J01 Tom Dolan
Technical Ed Center 110
Friday
10:00a - 5:30p
10/18 - 12/6
Technical Ed Center 119
Friday
10:00a - 5:30p
10/18 - 12/6
Technical Ed Center 120
Friday
10:00a - 5:30p
10/18 - 12/6

Seats remaining: 12

Pass/Fail grading.

Section requirement: instructor approval required.

Tuition and fees: $837 (additional charges may apply)

 
 
 

Content maintained by Marine Transportation.